Specifications

170°C
200°C
The cooking time can be pre-set to a maximum of 95 minutes.
Example: to programme the unit for a cooking time of 28 minutes at a temperature of 170°C.
1. Press
repeatedly until the display shows 170°C.
2. Turn the rotary control
until the display shows 28:00.
3. Press the rotary control
to start the cooking process.
Setting multiple programmes
Prior to operation, the microwave can be set for up to 3 programmes to run consecutively, e.g.
defrosting first, followed by the microwave and then the hot-air cooking function. The multiple-
programme feature can be used with any of the microwave, grill and hot-air functions.
Example: using the defrost function first, followed by the microwave and then the hot-air
cooking function.
1. Use the
button to select a reduced microwave setting for defrosting.
2. Turn the rotary control
to select the required defrosting time.
3. Use the
button to select a high microwave setting.
4. Turn the rotary control
to select the required microwave cooking time.
5. Use the
button to select the required hot-air temperature.
6. Turn the rotary control
to select the required hot-air cooking time
7. Press the rotary control
to start the multiple programme selection.
Note: The defrost programme, the automatic cooking programmes and the quick-programme are not
suitable for multiple programming.
Hint: This memory function is especially helpful when using the microwave to cook food at
different power settings. While a higher power setting is selected initially, the power can
be reduced at a later stage in order to keep the food hot, and to ensure that the heat is
evenly distributed when the food is already done.
Defrost programme:
This programme is useful for defrosting food by setting the defrosting time.
The defrosting time can be pre-set to a maximum of 95 minutes.
Example: to programme the unit for a defrosting time of 5 minutes.
1. Turn the rotary control
anti-clockwise until the display shows A-9.
2. Press
to confirm the programme selection.
3. Turn the rotary control
until the display shows 5:00.
4. Press the rotary control
to start the defrost programme.
Helpful notes:
Four beep signals indicate that 2/3 of the programmed defrosting time has elapsed. Turn the –
food over, taking out any that is already defrosted. Press the rotary control
to continue the
programme.
Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is –
advisable to limit any further defrosting times to 1-minute periods until the food is fully
defrosted.
Food stored in plastic containers that are not suitable for use in microwave ovens should be left –
25