Operation Manual

Version 3 2014-11

NOTE!

A water lter improves the water quality of the water

used by removing contaminants and scale from the

water. SEVERIN recommends the use of a water

lter for high water quality starting with 12 °dH.

8. Fill the water tank with cold drinking water up to the “Max“ marking

and place it on the appliance (g. 3). However, make sure that the

water tank hooks into the top of the appliance and lies close against

the appliance.

NOTE!

The tank must be lled only with cold, clean, non-

carbonated water. Never put milk, instant-powders,

syrups or any other avourings or additives into the

tank.

9. Use the arrow keys to select

•

no, if you do not want to use a water lter or

•

Yes, if you want to insert a water lter

and conrm your selection by pressing the OK button.

Â The display shows:

rinsing

Water runs from the coffee-milk dispenser into the drip tray.

As soon as the rinsing procedure is complete, the display shows

the "Beverage selection" view. The appliance is now ready for

operation.

NOTE!

Before preparing the rst specialty milk drink, the

air valve in the milk dispenser should be thoroughly

cleaned (►g. 10a).

g. 2: Inserting the water lter g. 3: Fitting the water tank