Instructions

18
∙ Open the refrigerator door.
∙ Remove the four covers C from the housing and inside
of the door
∙ Replace the covers and their extensions, turned through
180°, on the opposite side.
∙ Unscrew the hinge bolt on the inside of the door in the
area C/6 .
Caution: Support the door.
∙ Take off the refrigerator door.
∙ Take out the fi xing screws and remove the upper bracket
6. Note the small plastic plate underneath the bracket.
∙ Turn the bracket 6 including the small plastic plate
through 180° and replace it on the other side of the
refrigerator, using the two screw holes adjacent to each
other.
∙ Remove the lower panel 1.
∙ Unscrew the hinge bolt 2, together with the washers,
from the bracket 7, and fi t it into the corresponding
opening on the opposite side of the bracket 7.
∙ Place the refrigerator door onto the hinge bolt 2 on
holding bracket 7.
Caution: Support the door.
∙ Re-insert the hinge bolt of the bracket 6 into the
refrigerator door.
∙ Fit the four covers C over the bracket and the openings.
∙ Take out the cover 10 from the lower panel 1 and
replace it on the opposite side.
∙ Replace the panel 1 on the appliance.
∙ Remove the screw covering caps a and the sealing
plugs b.
∙ Take out the screws holding the door handle. Fit the
handle on the opposite side, using the fi xing screws to
secure it. Push the sealing plugs (provided) into the now
empty openings in the door and replace the covering
caps on the screw heads.
If the unit has been tilted to more than 30°, wait for
about 4 hours before re-connecting it to the mains.
Temperature control
The unit is re-activated by connecting it to the mains. It is
only switched off completely when the plug is removed from
the wall socket. The temperature in the refrigerator cabinet
can be adjusted by setting the temperature control. Turning
the control clockwise will decrease the temperature, while
turning it anti-clockwise will increase it.
The medium settings are usually most suitable for home
use.
We recommend using a thermometer to check the actual
temperature inside the cabinet and make adjustments as
necessary.
Following a power interruption, or if the unit has been
switched off on purpose, it may take 3 to 5 minutes before
it switches on again.