Manual

cord to touch hot surfaces or to come
into contact with any heat sources. Do
not allow the power cord to hang free;
the cord must be kept well away from hot
parts of the appliance.
Always switch o and remove the plug z
from the wall socket a er use, as well as
in cases of any malfunction and, -
during cleaning. -
When removing the plug from the wall z
socket, never pull on the power cord;
always grip the plug itself.
Caution: z do not operate the appliance
outdoors.
 e appliance is not intended to be z
operated by means of an external timer or
separate remote-control system
No responsibility is accepted if damage z
results from improper use, or if these
instructions are not complied with.
 is appliance is intended for domestic or z
similar applications, such as in
sta kitchens, o ces and other -
commercial environments,
agricultural areas, -
hotels, motels etc. and similar -
establishments,
bed-and-breakfast guest houses. -
In order to comply with safety regulations z
and to avoid hazards, repairs of electrical
appliances must be carried out by quali ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service departments.  e
address can be found in the appendix to
this manual.
 ermal safety cut-out
Should the oil/fat level fall below the safe
level for operation, the integral thermal safety
cut-out will be activated and the heating
element is switched o . If this occurs, allow
su cient time for the appliance to cool down,
then add the required amount of oil/fat. Use
the reset lever inside the power cord storage
compartment to reset the safety cut-out. Only
a er a reset can the appliance be used again.
Should the safety cut-out be activated
repeatedly despite a su cient oil/fat amount
in the frying container, the appliance must no
longer be used; please have it examined by a
quali ed person before it is used again.
Operation
Before using for the  rst time
Before  rst use, the unit should be cleaned as
described in General care and cleaning.
Lid
Always use the lid handle when taking o or
replacing the lid.
Frying container
 e recess below the heating element acts as a
cooling area where residual particles resulting
from the frying process, as well as other
impurities, are collected.  e circulation
of the oil/fat results in a lower temperature
level around the recess area.  is collection
process extends the life-span of the frying
oil/fat.
Inserting the frying container: –
Place the frying container into the housing.
Fill amount: –
Before heating up, the oil/fat level must be
between the minimum and maximum  ll
level marks inside the frying container.
Note: the di erence between the
minimum and maximum marks is
approx. 900ml.
Types of oil/fat to be used: –
Only pure vegetable oil/solidi ed fat
should be used in this deep fryer. It can
be heated up to 220° C and is neutral in
taste.
Do not mix di erent kinds of oil/fat.
Oil:
We recommend the use of oil speci cally
intended for deep-frying, which may be
safely heated to high temperatures.  e
10