Specifications

2. Turn the rotary control until the display shows 30:00.
3. Press the rotary control
to start the cooking process.
Setting 2:
The microwave function is active for 55% of the pre-programmed time, the grill function for 45%.
This programme is suitable for cooking potatoes or poultry.
Example: to programme the unit for a cooking time of 12 minutes at setting 2
1. Press
three times. KOMBI 2 appears in the display.
2. Turn the rotary control
until the display shows 12:00.
3. Press the rotary control
to start the cooking process.
Delayed operation timer
The microwave can be pre-programmed in such a way that it starts operating at a pre-determined
time. However, always check first that the time on the unit has been correctly set prior to using the
timer delay function.
1. Set the time (see Setting the clock).
2. Set the desired programme. However, do not press rotary control
yet.
3. Press
.
4. Use the rotary control
to select the desired hour setting (between 0-23), at which you want
the unit to start operating.
5. Press
. The selected hour setting and the current minutes are shown.
6. Use the rotary control
to select the desired minute setting (between 0-59), at which you want
the unit to start operating.
7. Press
. The display returns to the current time. The selected programme will start at the pre-
programmed time. A beep signal indicates the programme is starting.
Defrost programme
:
This programme is useful for defrosting meat and poultry simply by setting their weight.
1. Press
once for meat or twice for poultry.
2. Use the
button to set the appropriate weight (100g to 1800g)
3. Press the rotary control
to start the defrost programme. The remaining defrosting time
is shown in the display.
Helpful notes:
Two beep signals indicate that 2/3 of the programmed defrosting time has elapsed. Turn the food –
over, taking out any that is already defrosted. Press the rotary control
to continue the
programme.
Food stored in plastic containers that are not suitable for use in microwave ovens should be left –
for a while after being taken from the freezer. Wait until the food can be easily detached from the
plastic, before it is put into the oven inside a container suitable for use with microwave ovens.
Setting multiple programmes
Prior to operation, the microwave can be set for up to 3 programmes to run consecutively, e.g.
defrosting first, followed by the microwave and then the drill function.
Example: using the defrost function first, followed by the microwave and then the grill function.
1. Use the
button to select a reduced microwave setting for defrosting.
24