Specifications

may be put directly on the glass turntable with the food itself on the rack.
Close the door and set the desired programme. –
As the programme is started, the turntable starts to rotate. During operation, the interior light –
remains on.
If, during operation, the door is opened or the –
button is pressed (e.g. to stir or to turn the
food in order to ensure that the temperature is evenly distributed), the timer and programme
functions are automatically suspended. The programme will automatically resume only after the
door is closed again and the rotary control
is pressed.
Press –
twice to interrupt the programme.
A 4-beep signal indicates that the pre-programmed cooking time has elapsed; at the same time, the –
interior lighting switches off and the display shows 'ENDE'.
Open the door and remove the container with the food. –
In order to achieve an even heat distribution through the food, the container should be set aside for –
several minutes.
Note: If the door is not opened immediately after the pre-programmed operating time has elapsed, a
4-beep signal is heard every 2 minutes.
Note: The following steps are used for setting the cooking time:
0 – 5 minutes : 10-second steps
5 – 10 minutes : 30-second steps
10 – 30 minutes : 1-minute steps
30 – 90 minutes : 5-minute steps
The cooking times generally depend on several factors. –
Microwave radiation penetrates the surface of the food. For larger pieces of food, a longer –
cooking time is therefore needed than for the same amount of food if cut into pieces. The food
should also be evenly distributed on the plate.
To ensure that any germs in the food are safely destroyed, the food needs to be exposed to high –
temperatures for a sufficiently long period.
As a basic rule: half the amount - half the time recommended –
double the amount - almost double the time recommended.
Cooking timer
:
1. Press
once. An additional digital clock appears in the display.
2. Turn the rotary control
to set the desired cooking time.
3. Turn the rotary control
to start the cooking timer .
4. A beep signal indicates that the pre-set time has elapsed.
The maximum pre-programmable time is 90 minutes.
The microwave function
:
To programme the unit for cooking, the correct mode (microwave), the required power setting and
the cooking time must be selected, before the programme sequence can be started. The power setting
is selected by repeatedly pressing
. The cooking time can be pre-set to a maximum of 90 minutes.
Power settings
Type
1 x 900W High Heating up liquids, cooking
22