User's Manual

19 20
SETTING DESCRIPTIONS
DESIRED
RESULT
KEYPAD
ACTION
NOTES
Enable
Child Lock
Settings/Child
Lock On or if on
Child Lock O
Selecting this option activates the Child lock and
disables all the keypad functions when activated.
To turn o the child lock the press the Settings
button again and hold for 3 seconds, the display
shows Child lock o and press start to conrm.
Disable WiFi Settings/
WIFI OFF
Settings/
WIFI ON
Se
lecting this option allows you turn off the Wi-Fi
connection. If Wi-Fi is turned on the option displays
Wi-Fi OFF. Selecting this item by pressing Start turns
off the Wi-Fi function and the Wi-Fi Icon is turned
off on the display.
If Wi-Fi is turned OFF the option displays Wi-Fi ON.
Selecting this item by pressing start turns on the Wi-
Fi function and the Wi-Fi Icon flashes until a
connection is established. When a connection is
established the Wi-Fi icon stays on.
Note that if Wi-fi is turned off, you will not be
able to connect to the app or issue voice commands
to the oven.
Key sounds Settings/KEY
SOUND ON
Settings/ KEY
SOUND OFF
You can select whether you oven beeps each time
a key is pressed. Select this option and press Start
to turn o key beeps. If the key sound is turned on
(default) then the display shows KEY SOUND OFF.
If the key sound is turned o the display shows KEY
SOUND ON. Selecting this option by pressing Start
turns the key sounds on.
ECO mode Settings/ECO
MODE ON
Settings/ECO
MODE OFF
Selecting this option by pressing Start turns on
ECOnomy mode which turns o the LED display
when it’s not being used to save power. Pressing
any key turns the display back on.
If ECOnomy MODE is turned o (default) then the
display shows ECO MODE ON.
If ECOnomy MODE is turned on then the display
shows ECO MODE OFF. Selecting this option by
pressing Start turns o Eco mode
.
Start setup
process
Settings/
START SETUP
Your
oven will automatically be in Setup Mode
when it’s rst plugged in for 15 minutes. To set up
your oven after this time has passed, select this
option and press Stop to place your oven in setup
mode. Then go to the app on your phone to
complete the setup process.
Setup
A
sk button
Settings/ASK
S
ETUP
S
electing this option lets you set up the Ask
button.
Reset device Settings/
Factory Reset
Selecting Factory Reset erases all the your
i
nformation from your oven and removes any
connection to Wi-Fi and returns it to its
original settings.
Select this option and then “Press 1 to Conrm” and
then Press Start. If 1 is pressed the full factory reset
is performed. Press “Stop” to Cancel the operation.
Send logs
to customer
support
Settings/
Send Logs
Sends your device logs to customer support when
requested. Please do not use this function unless
requested by customer support.
OTA
download
Check Update Your oven will automatically updated as needed
over time. This function looks for a new software
update and installs immediately it if is available.
If an update is available the display shows
“Updating...” no action can be taken on the device
until the update is complete. When setup is
completed the display shows “Done” for 10 sec and
returns to the clock. If no update is available, the
display will show “No update”.