Certifications 2

Seuthe GmbH
EG - SAFETY DATA SHEET subject to the regulations 1907/2006/EG
Product Name: Steam-Smoke-Distillate / Smoke Fluid
Generation Date: 30.05.2017
Version: 1.2
___________________________________________________________________________
Page 7 of 13
specific use conditions. Contact the glove manufacturer for specific advice on glove selection
and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves.
The types of gloves to be considered for this material include: If prolonged or repeated contact
is likely, chemical-resistant gloves are recommended. If contact with forearms is likely, wear
gauntlet-style gloves. Nitrile, CEN standards EN 420 and EN 374 provide general
requirements and lists of glove types.
Eye Protection: If contact is likely, safety glasses with side shields are recommended.
Skin and Body Protection: Any specific clothing information provided is based on published
literature or manufacturer data. The types of clothing to be considered for this material include:
If prolonged or repeated contact is likely, chemical and oil resistant clothing is recommended.
Specific Hygiene Measures: Always observe good personal hygiene measures, such as
washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants. Discard contaminated
clothing and footwear that cannot be cleaned. Practice good housekeeping.
ENVIRONMENTAL CONTROLS
See Sections 6, 7, 12, 13.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Note: Typical physical and chemical properties are given below. Consult the Supplier in
Section 1 for additional data.
9.1 Information on basic physical and chemical properties
GENERAL INFORMATION
Physical State: liquid
Form: clear
Colour: colourless
Odour: light lemon scent
Odour Threshold: N/D
pH: not technical feasible
IMPORTANT HEALTH, SAFETY AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 °C): 0.771
Density (at 15 °C): 770 kg/m³ (6.43 lbs/gal, 0.77 kg/dm³)
Flash Point [Method]: >62°C (144°F) [ ASTM D-93]
Flammable Limits (Approximate volume % in air):
LEL: 0.6 UEL: 7.0 [ Extrapolated]
Autoignition Temperature: >200°C (392°F) [ASTM E659]
Boiling Point / Range: 185°C (365°F) - 213°C (415°F) [ASTM D86]
Vapour Density (air = 1): 5,7 at kPa [Calculated]
Vapour Pressure: 0.03 kPa (0.23 mm Hg) at 20°C | 0.2 kPa (1.5 mm Hg) at