User's Manual



60


4.OpenApplicationSettingstosetthebasicscanswitches,asshownin
Figure8‐5:
(1)Sound:Giveyouavoicepromptwhilescanning;
(2)Indicator:Theindicatorstaysgreenduringscanningwhenit’son.
(3)Vibrate:Giveyouavibrationtipwhilescanning;
(4)Append:Continuouslyoutputbarcodes;
(5)Autoclear:Automaticallyclearthelastbarcodebeforethenextbar
codescanningstarts;
(6)Bootedstart:AutomaticallyturnontheScantoolwhenbootingup;
(7)Showtype:Displaythebarcodetypewhilescanning;
(8)FilterinvisibleChar:Filtertheinvisiblebarcodecharacters;
(9)Filterthefirstandlastspaceofthebarcode:Filterthefirstandlast
spaceofthebarcode;
(10)Stop scan on up: Loosen scan button and the scan lighting
immediatelyturnsoff,orpressscanbuttonandthescanlightcontinues
foracertaintimerange(setScanduration)beforeturningoff;
(11)Loopscan:Automaticallyscanbarcodecontinuously;ifswitchon
continuouslightingmodeinBasicsettingsandthenscanwithcontinuous
lighting;
(12)Interval:Settimedelaybetweentwoscans;
(13)Restorethebarcodedefaultsettings:youcanrestorethebarcode