Specifications

34
6) Select the Use DHCP checkbox. The Dynamic Host Configuration Protocol is then used to populate
the IP Address, Subnet Mask, and Gateway Address fields.
7) Select Modbus from the Mode drop-down list.
8) Click Update Logger.
HeadStart displays the following message when the connection is successful.
9) Enter the Port connected to the Power Patrol. A checkbox is available to make the port the default.
Different networks may require different ports. See your network administrator.
10) Click Connect to connect HeadStart with the Power Patrol. The Status field informs you of the
connection process. When the connection is complete, the Device Info fields display Serial Number
and Firmware Version of the Power Patrol meter.
DID YOU KNOW? Setra Systems uses
well-known and registered port
numbers for BACnet (47808) and
Modbus (502) assigned by the IANA
(Internet Assigned Numbers
Authority).