Specifications

31
Communications
The Communications screen is used to configure the networking options for HeadStart (PC Interface,
COM port, Modbus address, etc.)
SETTING USB COMMUNICATION PARAMETERS
1) Select USB/RS-485(MSTP) to gather information via HeadStart software.
2) Enter the PC COM Port connected to the Power Patrol.
-or-
Select one of the previously used addresses from the drop-down list.
3) Click Connect to connect HeadStart with the Power Patrol. The Status field informs you of the
connection process. When the connection is complete, the Device Info fields display Serial Number
and Firmware Version of the Power Patrol meter.