Specifications

26
Ethernet (TCP/IP) Connection
1) Select Ethernet (TCP/IP) to gather information via a network connection. When selected, the
Communications Setup screen changes and an IP Address is required.
2) Select your mode of communication.
3) Enter the IP Address for the Ethernet connection of the meter or select one of the previously used
addresses from the drop-down list. See About IP Addresses.
-or-
Use the Scan Network or Setup buttons to acquire a new IP Address. See About IP Addresses.
4) Enter the Port connected to the Power Patrol meter. A checkbox is available to make the port the
default. Different networks may require different ports. See your network administrator.
5) Click Connect. Status box will show a connected status.