Specifications

REDUCED RESOLUTION WEIGHING

In the presence of severe vibration or draft a stable display can often be achieved by

reducing the displayed resolution.

1. Press the x10 key to reduce displayed reading by one digit.

2. To return to the normal displayed resolution, press the x10 key again.

PERCENT DEVIATION

To calculate the amount by which a weight varies from a reference, follow this

procedure:

1. Press tare.

2. Place the reference weight on the pan.

3. Press the % key. After acquiring a stable reading, the display will read “100.000

pc”.

4. Press the tare key. After acquiring a stable reading, the display will read

“0.000pc”. The display shows percent deviation.

5. Remove the reference weight.

6. Place the weight to be measured on the pan.

7. Wait for the “OK” symbol to appear. Read the display. The display indicates

percent deviation from the reference.

8. Remove the weight.

9. Repeat Steps 6-8 as many times as desired.

10. Press clear to return to weighing.

FILLING TO A TARGET WEIGHT - FORMULATION BY PERCENTAGE

It is often useful to measure out a certain weight of substance which is a mixture (by

percent) of component parts. This is easily done by using the percent function.

1. Place a container on the pan.

2. Press tare.

3. Press the — key.

4. Enter the target weight.