Specifications

Setra Quick Count™ Operator's Manual 5
EXPERIMENTATION
1. Display test
When your scale is first powered on, it automatically runs through
a display test; lasting about six seconds. The scale next displays
“ C nnn g” where nnn equals the full scale capacity in grams),
performs self-diagnostics to ensure proper operation and then sets
itself to zero. A wake up message is always transmitted upon power
up. (If a printer is connected to the scale, the scale model,
capacity and software version will be printed. If the scale is
connected to a computer the wake up message may be disregarded.)
The scale is then ready for use. For best accuracy, allow the scale
to warm up for 5 minutes.
2. Using your scale for the first time
It is important that you read this operator's manual thoroughly to
ensure proper use of your scale. Nonetheless, experimenting with
your scale and its keyboard prior to reading this manual in its
entirety will not harm your scale (provided it is not overloaded),
and may actually give you a better understanding of the
instructions in this manual. If you instruct the scale to do
something it is not capable of doing, the scale will respond by
displaying the message “ UnAbLE” . To continue experimenting, simply
press the clear key.