Specifications

5
EXPERIMENTATION
1. Display test
When your scale is first powered on, it automatically runs through a
display test; lasting about six seconds. The scale next displays “C nnn
g” (where nnn equals the full scale capacity in grams), performs self-
diagnostics to ensure proper operation and then sets itself to zero. A
wake up message is always transmitted upon power up. (If a printer is
connected to the scale, the scale model, capacity and software version
will be printed. If the scale is connected to a computer the wake up
message may be disregarded.) The scale is then ready for use. For best
accuracy, allow the scale to warm up for 5 minutes.
2. Using your scale for the first time
It is important that you read this operator’s manual thoroughly to
ensure proper use of your scale. Nonetheless, experimenting with
your scale and its keyboard prior to reading this manual in its entirety
will not harm your scale (provided it is not overloaded), and may
actually give you a better understanding of the instructions in this
manual. If you instruct the scale to do something it is not capable of
doing, the scale will respond by displaying the message “UnAbLE”. To
continue experimenting, simply press the clear (EZ6) or zero (EZ2)
key.