Specifications

Print Output Setup

There are five different print formats that can be selected through the

keypad. These print formats are designed for the CoStar SETRA250 receipt/

label printer, an ASCII printer or even another Setra scale (dual scale fea-

ture). To select one of the five default print formats, follow the steps below.

For more advanced formatting to either an ASCII printer or PC, refer to the

Easy Count Technician’s Guide.

1. Press and hold the zero key and then press the count key.

2. The scale will display “SPAn”.

3. Press the count key to scroll to the printer selection menu, the display

will read “Set Pr”.

4. Press the zero key to enter the printer selection menu.

5. The scale will display “APW BC” which is the first print selection. This is

the factory default and when selected will send a bar coded APW label

to a CoStar SETRA250 printer.

6. Press the zero key to print a bar coded APW label to a CoStar SE-

TRA250 printer, or press the count key to move to the next selection.

7. The scale will display “PAPER” for printing Net Weight, APW and Piece

Count, in English, on a paper receipt printer.

8. Press the zero key to print the Net Weight, APW and Piece Count, in

English, on a paper receipt printer, or press the count key to move to

the next selection.

9. The scale will display “AC200” for printing to the Auto Count 200.

Please refer to the AC200 manual for information on formatting the

bar code label.

10. Press the zero key to print to an Auto Count 200, or press the count

key to move to the next selection.

11. The scale will display “LAbEL” for printing an English label with the Net

Weight, APW, and Piece Count on a CoStar SETRA250 printer. For label

printing to a printer other than the CoStar SETRA250, please refer to

the Easy Count Technician’s Guide.