Specifications
10
BASIC COUNTING USING THE COUNT KEY (EZ2)
To count a number of like objects on the scale, use the following procedure:
count
zero
0.00
g
1. Place an empty container on the scale. Press the zero key.
Add 10
count
zero
PC
2. Press the count key. Each time the key is pressed the requested sample
size will increase (i.e., Add 10, 25, 50, 100 PCs).
10
count
zero
PC
3. Place the requested number of pieces in the container. Press the
count key a second time.
202
count
zero
PC
4. Fill the container to the desired number of pieces.
count
zero
Tape/Label
278
PC
5. Press the count key again to generate a tape/label by transmitting the
data out the RS-232 port.
count
zero
0.00
g
6. Remove the pieces from the container and press the zero key once to
return the scale to the weight display. (Pressing the zero key twice will
return the display to Ø pieces, enabling you to continue counting the
same parts.)