Specifications

6
123456789101112131415
Channel 1
Inputs/Excitations
Channel 2
Inputs/Excitations
Alarm
Signals
Figure B
Terminal Block Connector
Setra Setra
Transducer* Transmitter*
Pin Description w/Red Cable w/Gray Cable w/Gray Cable
1. Ground
2. Hi ALArm
3. Lo ALArm
4. Ch. 1 / Ch. 2
5. +24 Volts excitation White Red Red
6. Ch. 1 + In Yellow Green
7. Ch. 1 -In Brown White
8. Ch. 1 Current input Black
9. Ground Black/Shield Black/Shield Shield
10.+ 12 Volts excitation (optional) White Red
Caution: Do not common
to Pin 5 or Pin 11 (+24V exc.)
11.+ 24 Volts excitation White Red Red
Caution: Do not common
to Pin 10 (+12V exc.)
12.. Ch. 2 + I n Yellow Green
13. Ch. 2 - In Brown White
14. Ch. 2 Current input Black
15. Ground Black/Shield Black/Shield Shield
*IMPORTANT: If you are not using a Setra transducer or transmitter, see
manufacturer's transducer/transmitter operating instructions for terminal
circuit configuration and then connect the wires to the corresponding pins
listed in the above chart.