Specifications

17
STEP 3.
TARE
POWER
MODE
SPAn
LLLLLL
Remove the pan and pan support. Hold down the TARE key then press the
MODE key. Release both keys, the display will read “SPAn”.
STEP 4.
MODE
TARE
POWER
CUS7On
SPAn
Press the TARE key repeatedly until the display reads “CUSTOn” for the
customization menu.
Note: To escape anytime during this procedure, press the TARE key until
“ESCAPE” is displayed and then press the MODE key.
STEP 5.
SPEEdCUS7On
MODE
TARE
POWER
Press the MODE key to enter the customization menu. The display will read
“SPEEd” for the balance’s response rate setting.
STEP 6.
MODE
TARE
POWER
CAL 7
SPEEd
Press the TARE key once and the display will read “CAL T” for the temperature
calibration menu.
STEP 7.
MODE
TARE
POWER
FAC 7P
CAL 7
Press the MODE key to select the temperature calibration menu and the
display will read “FAC TP” for the factory temperature calibration. Proceed