Specifications

14
STEP 2.
MODE
TARE
POWER
FACdEF
SPAn
Press the TARE key repeatedly until the display reads "FACdEF" for factory
defaults.
Note: To escape anytime during this procedure, press the TARE key until
"ESCAPE" is displayed and press the MODE key.
STEP 3.
0.00FACdEF
MODE
TARE
POWER
Press the MODE key to restore the set ups to the original factory defaults. The
balance will display “buSY” and then return to the normal weighing mode.
ENVIRONMENTAL CUSTOMIZATION
Most high precision balances are used in stable environments, away from
drafts and vibration. You may customize the balance with regards to its
environmental conditions. The balance’s response rate can be set to fast,
slow or auto, depending on your application.
The balance is set to the auto mode from the factory. This mode is recom-
mended for most applications and will provide good stability and response.
The fast mode will provide a faster response than the auto mode and is
suitable for applications such as filling to a target weight. In environments
where draft and vibration are present, the displayed weight may not be as
stable as required.
The slow mode will provide maximum stability especially in a noisy or drafty
environment; however, the response rate may be slower.
To set the display response rate for your application, perform the following
steps: