Specifications

11
STEP 6:
LF 4LInEFd
MODE
TARE
POWER
To view the preset number of line feeds available (1-18) press the TARE key
repeatedly. To program a form feed command for the CoStar SETRA 250
printer, select “LF 0” as the number of line feeds. When the desired number
of line feeds is displayed, press the MODE key. The balance will then return to
the normal weighing mode.
SETTING THE BAUD RATE
The balance is capable of interfacing with a wide variety of computer de-
vices. To set the baud rate (the rate at which the scale communicates with a
computer/printer) and parity, use the following procedure:
STEP 1.
TARE
POWER
MODE
SPAn
0.00
Hold down the TARE key then press the MODE key. Release both keys, to
display "SPAn".
STEP 2.
MODE
TARE
POWER
bAUd
SPAn
Press the TARE key twice, the display will read “bAUd” for baud rate.
Note: To escape anytime during this procedure, press the TARE key until
"ESCAPE" is displayed and press the MODE key.
STEP 3.
MODE
TARE
POWER
300bAUd
Press the MODE key to enter the baud rate menu. The display will read 300. To
view the other baud rates press the TARE key repeatedly.