Specifications

23
T UNITS
T units are tamperproof user-definable units which are indirectly changed by enter-
ing a factor or divisor. To change T units, proceed as follows:
1. Calculate the ratio you wish to enter. If your ratio is in grams per T unit, ounces
per T unit, etc., you will enter a divisor. Proceed with Steps 2 through 10.
If your ratio is in T units per gram, T units per ounce, T units per pound, etc., you
will enter a factor. Proceed with Steps 2 through 10 skipping step 6.
2. Press the conv key until the display reads in the units from which you wish to
convert.
3. Press the key.
4. Enter 1732. This is the tamperproof code.
5. Press the setup/cal key.
6. If you are entering a divisor, press .
7. Enter the conversion ratio.
8. Press the setup/cal key.
9. Place an object to be weighed on the scale.
10. Wait for the "ok" symbol, then read the display. The weight is given in T units.