Product specifications
©2014 Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc. Phone: 800-257-3872 • Fax: 978-264-0292 • setra.com
DIFFERENTIAL PRESSURE
21
Model 230
Pressure Transducer
3.05
77
2.44
62
Screws
Transducer
Mounting Holes
2.15
55
2.00
51
1.50
38
2.50
64
3.00
76
0.52
13
0.88
22
1.30
33
Dia. 0.156
Dia. 4.0
Notched
for Clamp
Mounting
NPT High
Pressure Port
1.94
49
1
Pressure Port
Dia. 0.875 Conduit
Dia. 22 Opening
1.63
41
1.63
41
1.00
25
IN
MM
0.43
11
SPECIFICATIONS
Performance Data Physical Description (Model 230) Electrical Data (Voltage)
Accuracy RSS
1
(at constant temp) ±0.25% FS Case Stainless Steel/Aluminum Circuit 3-Wire (Exc, Out, Com)
Non-Linearity, BFSL ±0.20% FS
Electrical Connection Barrier strip terminal block with conduit enclosure & 0.875
DIA conduit opening.
Excitation 9 to 30 VDC for 0-5 VDC Output
13 to 30 VDC for 0-10 VDC Output
Hysteresis 0.10% FS Pressure Fittings 1/4”-18 NPT internal Output
7
0 to 5 VDC
8
, 0 to 10 VDC
8
Non-Repeatability 0.05% FS Weight (approx.) 14.4 oz Output Impedance 100 ohms
Thermal Eects
2
Sensor Cavity Volume 0.27 in
3
Positive Port, 0.08 in
3
Negative Port
Electrical Data (Current)
Compensated Range °F(°C) +30 to +150 (-1 to +65)
(With 1/4”NPT external ttings installed-does not include cavity volume of 1/4”NPT external ttings.) Circuit 2-Wire
Zero Shift %FS/100°F(%FS/50°C) 2.0 (1.8)
Physical Description (3-Valve Manifold Assembly)
4
Output
9
4 to 20mA
10
Span Shift %FS/100°F(%FS/50°C) 2.0 (1.8) Manifold Block Brass External Load 0 to 1000 ohms
Line Pressure Eect
Zero shift ±0.004% FS/psig
line pressure
Valves (3)
5
V1 for Connection to + port
V2 for Connection to - port V3 for Equalizing Pressure
Minimum supply voltage
(VDC)
9+ 0.02 x (Resistance of receiver plus line).
Resolution
Innite, limited only by
output noise level (0.02%FS)
Valve Type 90° On/O Maximum supply voltage
(VDC)
30+ 0.004 x (Resistance of receiver plus
line).
Static Acceleration Eect 2%FS/g (most sensitive axis)
Process Connections 1/4”-18 NPT Internal Thread
Pressure Media
Natural Frequency 500 Hz (gaseous media)
Dimensions 7.05”W x 6.25”H x 2.16’’D Model 230
Warm-up Shift ±0.1% FS total Weight <2.5 lbs. Gases or liquids compatible with 17-4 PH Stainless Steel, 300 Series
Stainless Steel, Viton and Silicone O-Rings.
Note: Hydrogen not recommended for use with 17-4 PH stainless steel.
Optional Buna-N O’rings are recommended for hydrocarbon applications.
Response Time 30 to 50 milliseconds
Physical Description (5-Valve Manifold Assembly)
6
Long Term Stability 0.5%FS/1 YR Manifold Block Brass
Maximum Line Pressure 350 psig
Valve (5)
5
V1 for Connection to ± Port
V2 for Connection to – Port
V3 for Equalizing Pressure
V4 & V5 for Connection to External
Gauge or Alternate Plumbing Conguration
3 & 5 Valve Manifold
Environmental Data
Gases or liquids compatible with 360 brass, Copper 122, Acetal plug
valves and Nitrile O-rings.
Operating
3
Temperature °F (°C) 0 to +175 (-18 to +80) Process Connection 1/4”-18 NPT Internal Thread
5
Refer to drawings on page16 and 17.
6
7
Calibrated into a 50K ohm load, operable into a 5000 ohm
load or greater.
8
9
a 250 ohm load.
10
tp wothin ±-.16 mA
Specications subject to change without notice.
Storage Temperature °F (°C) -65 to +250 (-54 to +121) Dimensions 7.05”W x 6.25”H x 2.16’’D
Vibration 5 g from 5 Hz to 500 Hz Weight <3.8 lbs.
Acceleration 10 g
1
RSS of Non-Linearity, Hysteresis, and Non-Repeatability.
2
3
Operating temperature limits of the electronics only. Pressure media temperatures
may be considerably higher.
4
Shock 50 g