Specifications

Bases Setup • Super II 59
SETUPS
MORE
BASES
SETUP
ZERO
abc reset
tare
menu remote
Soft Key:
ZERO
Setting the Level of Zero Tracking
The scale is programmed with a level of zero tracking designed to help the scale maintain zero weight in a
normal operating setting. Zero tracking works by rejecting very small changes in weight as “noise” and
keeping the display on zero. For certain applications, such as monitoring slow flow rates, zero tracking can
be turned off. On the other hand, in “bad” or “noisy” environments, zero tracking can be increased to help
the scale maintain zero weight when nothing is added to it.
To access the ZERO setting in the Bases Setup menu, follow the menu tree or press the keys in the order listed
below:
To enter a level of zero tracking, use the numeric keypad followed by the ENTER soft key or choose from
the available options. A scale division is the smallest increment that the display is set to detect. The factory
default is set for 1/2 division of zero tracking.
Note: A zero tracking window cannot be entered at greater than 100 displayed divisions.
Display noise