Specifications

Supervisor Setup • Super II 14
D. After selecting and formatting all of the desired fields, select the DONE soft key at the
end of the field selection menu (see “Selecting Fields to Print”, p. 15).
ELTRON*
A. For the Eltron printer, type in the name of the label as stored in the printer with the
Create-A-Label software by using the alphanumeric keypad (abc key) followed by
the ENTER soft key.
B. Next select the Create-A-Label “when printed” fields (see “Selecting Fields to Print” ,
p. 15 in the order they appear on the Eltron label as created with the Create-A-Label
software.
C. After choosing the last “when printed” field, select the DONE soft key at the end of
the field selection menu (see next section). When printing an Eltron label, the
Super II software recalls the label name as stored in the printer and then sends the
appropriate “when printed” field information followed by the print command (see
ScriptCoder Manual for more information on Eltron Create-A-Label formats).
SCRIPTCODER
ScriptCoder is a powerful scripting language that allows the user to program the print register a single
character at a time. There are four methods of data entry for a script. Please refer to Appendix B or the
ScriptCoder Manual for a detailed explanation of each method of data entry and scripting language.
*Eltron
®
is a registered trademark of Zebra Corporation
ENTER CODE PC BARCODE GO BACK
Enter each character or code now. PC
to download script. BARCODE to scan.