Specifications

Supervisor Setup • Super II 13
Based on the print format type selected, one of three series of screens appears:
DYMO
®
* Setra 300/COSTAR
A. Select LABEL (ends with form feed) or PAPER printing (sends a line of
dashes between printings).
B. Choose label orientation as either PORTRAIT which limits the bar coded ID information
to 9 characters when using the Setra control codes or LANDSCAPE which limits the bar
coded ID information to 20 characters when using the Setra control codes. (See RS232
Communications in Appendix A for more information on Setra control codes).
C. Select a print field to appear on the label (see “Selecting Fields to Print”, p. 15). After
selecting a field to print, choose the output characteristics for that field.
SMALL ENGLISH is for the regular sized English text printing (straight ASCII text).
LARGE ENGLISH is for large English text printing (contains Dymo
®
control codes).
Large text has twice the height of the small text, but the same width.
BARCODE SC ENG is for a bar coded field with the Setra control characters (see
RS232 Appendix A) and regular size English
BARCODE SC LENG is for a bar coded field with the Setra control characters (see
RS232 Appendix A) and large English text.
BARCODE ENGLISH is for a bar coded field without the Setra control characters and
regular size English
* Trademark of Dymo
®
Corporation
PRTRAIT LNDSCPE GO BACK
Select print orientation:
Select the output for the field:
SMALL LARGE BARCODE BARCODE BARCODE
ENGLISH ENGLISH SC ENG SC LENG ENGLISH
LABEL PAPER GO BACK
Select your media type: