Specifications
Supervisor Setup • Super II 12
Select the function to program:
PRINT FORMATS allows the print registers to be configured.
.
PRINT INTRVL allows programming a time interval which, when elapsed, causes the scale to print
a selected format.
Programming a PRINT Format
Print Format Options: There are ten available formats that can be individually configured. Pressing the
PRINT FORMATS soft key described previously will access the Print register selection menu.
Select the NAME soft key to change the print format name (the title that appears in the above screen).
Select ON/OFF to enable and disable the print format. Disabled print formats cannot be printed but retain
their format information. Select # COPYS to program multiple label prints. Pressing # Copys will display the
following screen:
Either enter the number of copies to be printed using the numeric keypad and press the ENTER soft key or
press the VARIABL soft key to allow the user to choose the number of copies when printing.
To program a print format, follow the steps below:
1. Using the numeric keypad, select the desired print register to program
2. Select the output port for the print format.
3. Select the print format type:
NAME ON/OFF DELETE # COPYS GO BACK
Select Print Register:
0. Print 0 4. Print 4 8. Print 8
1. Print 1 5. Print 5 9. Print 9
2. Print 2 6. Print 6 –. Prt Int
3. Print 3 7. Print 7
BI OUT GO BACK
Select the port for the printer output.
Enter number of copies to be printed or
VARIABL to select number at print time:
ENTER VARIABL GO BACK
COPIES:
Select your printer type:
DYMO ELTRON SCRIPT GO BACK
COSTAR