Specifications
Supervisor Setup • Super II 11
Soft Key:
PRINT SETUP
Setting Print Formats or Print Interval
This setup allows for the design of up to ten different label formats, as well as, setting up the interval
printing function. There are three types of label formats available - the Dymo
®
SETRA 300 printer format,
the Eltron printer format, and Scriptcoder. Each of these formats is detailed below.
The Dymo
®
SETRA 300 has either “English only” or bar code and English information available for printing.
Straight ASCII text output is available by selecting “regular” size (vs. large print) which is compatible with
any serial dot matrix printer.
The Eltron printer selection is only designed to work in conjunction with a label format created using the
Eltron Create-A-Label software. The label format is stored in the printer’s memory. When an Eltron label is
printed, scale information is sent to the printer and combined with the label format in the printer.
For any other serial printer, a label design can be created using the ScriptCoder feature (see Appendix B for
details).
To access the PRINT SETUP menu, either follow the menu tree or press the soft keys in the order listed
below:
The soft keys will change to the following:
PRINT PRINT GO BACK
FORMATS INTERVL
Select your print format # or special
instructions from the menu below:
SETUPS
MORE
SUPER
SETUP
PRINT
SETUP
abc reset
tare
menu remote