User guide

6
2.0 PARTS
2.1 SRPM (Setra Room Pressure Monitor) INCLUDED
PARTS
Quantity
1 SRPM assembly
2 Barbed Couplings, Brass, Plated
2 1/4 inch Tubes, Silicone
4 6-32 x 1/2” Mounting Screws for connecting
the SRPM Base to the plaster ring
2.2 SRAN (Setra Remote Annunciator) INCLUDED
PARTS
Quantity
1 Annunciator Assembly
2.3 RPS (Room Pressure Snubber) INCLUDED PARTS
Quantity
1 Room pressure snubber Assembly
2.4 Parts required and to be supplied by installer
MOUNTING AND WIRING
To mount and install properly, the following components are
required:
NOT INCLUDED and required for each SRPM
Quantity
1 Double Gang Metal Electrical Box with Grounding Stud
1 4 x 4 inch Metal Plaster Ring
1 Door Switch SPDT or SPST, N.O., as needed
NOT INCLUDED and required for each remote annunciator and
room pressure snubber
Quantity
1 Single Gang Electrical Box
1/4 “ tubing as required to connect between the RPS
(Room Pressure Snubbers) and the SRPM