User guide

ST-EG100-E Installation and User Guide Virtual Keypad
• Bypass - Opens a dialog to allow the user to bypass a zone. Zones may only be
bypassed when the system is not armed. All Bypassed zones are cleared once the
system is disarmed. The Bypass button will be illuminated when any zone is
bypassed.
Activating the checkbox for each respective zone and clicking on “OK” will toggle
its bypass state.
o Ignore - Zone is currently being monitored. Activating checkbox will
place the zone in “bypass” mode.
o Monitor - Zone is currently in “bypass” mode. Activating checkbox will
place the zone in “un-bypass” mode.
• Instant - Allows the user to set the current arming mode to instant. “Instant” mode
forces an immediate alarm if an entry zone is violated. This button can only be
activated during the exit delay countdown.
SETECH Security & Automation Revision 1
96-300001 Page 28 of 44