User guide

ST-EG100-E Installation and User Guide Virtual Keypad
Area Menu - Presents a list of defined areas. Displayed status and all security related functions
are directed to the currently selected area.
Keypad Menu - Presents a list of keypads assigned to the selected area. Virtual Keypad button
functionality is configured for the specified keypad.
Arming Status LEDs
• Armed – Displays solid red when the system is in an armed state.
• Ready - Displays solid green when the system is ready to be armed. If any zone is not
in a “ready state” this indicator will be shown is a disabled state (grey).
Auxiliary Buttons
• Refresh - Forces a refresh of all system settings. This can be used to repaint the
screen in the event of a communications failure.
• Status - The “Status” button displays all zones defined in the currently selected area
by name, along with their status and state. Valid statuses are “Normal”, “Bypassed”,
or “Violated”. Valid states are “Short”, “Open”, or “EOL”. The “Close” button
returns the Virtual Keypad back to the keypad display.
SETECH Security & Automation Revision 1
96-300001 Page 27 of 44