User guide

ST-EG100-E Installation and User Guide Configuration
Figure 6 - Reboot Required Confirmation Dialog Box
17. Activate OK button and the system displays the Reboot M1XEP dialog box (see Figure 7).
Figure 7 - Reboot M1XEP Dialog Box
18. Activate Yes button to reboot the ST-EG100-E to apply the changes. Reboot takes up to 2
minutes to complete, and a connection can not be re-established with the ST-EG100-E until
reboot is complete. If the network address configuration has been changed, it will be
necessary to update the ElkRP2 configuration as described previously.
19. Select Save Account from the File pull-down menu located at the top of the ElkRP2 window
to save all changes to the ElkRP2 database.
SETECH Security & Automation Revision 1
96-300001 Page 15 of 44