Owner's Manual

17
Figure 7: Navigate to ‘PA’ and press and hold EXT for 10 seconds to clear the Node memory
To clear the Node of all previously paired devices:
1. Go to the RVMaster App General Settings and press Bluetooth Connection.
2. Press Unpair to unpair the Controller from the Node.
5. Pair the Controller to the Node again.
6. Pair the new device to the Node.
3. Navigate to the ‘PA’ function on the Controller display.
4. Press and hold the EXT button for approximately 10 seconds until the number
1 scrolls across the Controller display.
The Node is now cleared of all connected devices.
Figure 6: Unpair the Controller and Node