Owner's Manual

DIAGNOSTICS

The diagnostics page will display any detected faults in the system.

To clear circuit faults, remove the suspected short and toggle the suspected

output to clear the fault indicator.

1. For lights, tank heaters, water heaters, water pumps, electric heaters or gas

heaters, if a short occurs on these outputs, a red fault indicator will appear.

FIGURE 55: Red Fault Indicator

UNIT CONVERSION

To change the temperature unit, go to the settings menu on the App home screen

and press Preferences.

From there, the temperature unit can be toggled between Fahrenheit and Celsius.

FIGURE 56: Gas Water Heater Warning

2. The gas water heater has its own warning output. If it signals a fault, a warning

will appear on the gas water heater button.

3. The motor outputs do not indicate a warning if the wires are shorted.

4. If a fault occurs on a Climate output (e.g. the compressor output), a fault icon

will appear in the zone. To clear the Climate fault, diagnose that Climate zone,

remove the short, turn the Climate oﬀ and then turn it back on to reset the

fault display.