Owner's Manual

From General Settings, you can:
9 Check the Bluetooth Connection between the
Node and your smartphone.
9 Establish a Remote Connection to the BMPRO
Cloud.
For more information, refer to the section Cloud
Control.
9 Enter the Winegard network name and password
to connect to the internet (model dependent).
For more information, refer to the section
Winegard.
9 Set Sensors Settings, allowing for the setting of
tire pressure sensor underpressure and over-
temperature limits, and the toggling of sensors on
and off.
9 Check the wireless Battery Levels of any installed
Switch.
For more information, refer to the section
Checking the Battery in Your Switch.
9 Set Motor Settings, which depending on the level
of controller installed, can be used to set zero-
point calibration (model dependent).
9 View Energy Center Settings.
For more information, refer to the section Energy
Center Settings.
9 View Solar Controller Settings.
For more information, refer to the section Solar
Controller Settings.
9 Access a digital version of the User Manual.
9 View information About SYSTEM: all about the
system, Node Firmware version, App version, etc.
9 View the BMPRO Privacy Policy.
9 Set your unit Preferences for temperature and
pressure.
9 View the Diagnostics page, showing any detected
faults.
FIGURE 50: General
Settings Mobile
Screen
41