Owner's Manual

ENERGY CENTER

GENERATOR (MODEL DEPENDENT)

Using the Generator over Bluetooth

To turn on the generator using Bluetooth, press and hold the Start Generator

button until the generator starts. The App will also show the running status of the

generator. To stop the generator, press and hold the Stop Generator button until

the generator stops.

Using the Generator over the Cloud (Model Dependent)

To turn on the generator over the cloud, press the Start Generator button. A

conﬁrmation message will appear. Swipe right on the Swipe to Enable button to

start the generator.

Generator Fault

If the Generator Status section in the App indicates a fault:

1. Press the Stop Generator button.

2. Fix the fault with the generator.

3. Press the Start Generator button.

If the fault has been ﬁxed, when you next turn the generator on from the App, the

Generator Status section will display “No fault”.

FIGURE 38: Energy Center Display

BATTERY MONITORING

Battery Monitoring allows you to monitor RV and/or chassis voltages. If no RV and

chassis batteries are connected, the App will monitor the system voltage of the

Node.

If the voltage drops below 12V, a warning will appear on the screen.