Owner's Manual

You can only set up Winegard if your RV is equipped with a Controller.

WARNING

FIGURE 20: Winegard login

WINEGARD

To set up Winegard:

1. Go to the Settings menu.

2. Scroll down and press Winegard Settings.

Logging into Winegard network

1. Press the search button to search for the available networks.

2. Select the desired network and enter the password or enter the network name

and password. If your network is not seen, make sure the Winegard is turned

on and scan again.

3. After the network name and password are entered correctly, press Join.

CLOUD CONTROL

To control the RV from cloud:

1. Launch the App on your smart device.

2. Press Log in to BMPRO Cloud, or in General Settings, press Remote

Connection.

3. Enter your email address and password.

Use cloud control to remotely monitor and control features in your RV.

For your safety and for the prevention of unintentional damage, the leveling,

motor controls and the water pump ON switch can not be controlled from the

cloud.