OWNER’S MANUAL OdysseyControl OdysseyLink INCLUDING TEAMBMPRO.
POWERING YOUR ADVENTURES With over 50 years’ experience in power solutions combined with manufacturing and design facilities in Melbourne, Australia, BMPRO are the leading experts in RV power and control management. Inspired by the great outdoors, we have created a range of rugged, smart and reliable products to power your adventures.
SAFETY PRECAUTIONS Please read the Safety Precautions before installing or using the OdysseyControl and OdysseyLink. Be sure to observe all precautions without fail. Failure to observe these instructions properly may result in personal damage, or personal injury which depending on the circumstances may be serious and cause loss of life. WARNING: Do not ingest battery. Chemical Burn Hazard This product contains a coin/button cell battery.
CONTENTS SAFETY PRECAUTIONS ������������������������������������������������������������������������������������������������������������ 4 ABOUT THE ODYSSEYCONTROL ������������������������������������������������������������������������������������������ 8 SMARTCONNECT ������������������������������������������������������������������������������������������������������������������������ 8 ODYSSEY SYSTEM DIAGRAM �����������������������������������������������������������������������������������������������
SERVICING �����������������������������������������������������������������������������������������������������������������������������������24 FAQS AND TROUBLESHOOTING ������������������������������������������������������������������������������������������25 ODYSSEYCONTROL �����������������������������������������������������������������������������������������������������������������25 LOAD CONTROL ��������������������������������������������������������������������������������������������������������
ABOUT THE ODYSSEYCONTROL The OdysseyControl is a sleek, in-built, app-driven battery monitor and control console that operates with BMPRO’s BatteryPlus35 via the OdysseyLink.
ODYSSEY SYSTEM DIAGRAM 9
DESCRIPTION OF PARTS ODYSSEYCONTROL APP 1 2 3 8 4 5 6 7 9 10 Figure 1: The OdysseyControl Dashboard 1. PAIRING STATUS Indicates the Bluetooth pairing status between the OdysseyControl and the OdysseyLink. ICON PAIRING STATUS CONNECTED DISCONNECTED Table 1: Pairing status indicators WARNING When Bluetooth is disconnected, any information displayed on the OdysseyControl will be incorrect.
2. SETTINGS MENU Provides access to the OdysseyControl settings and functions. 3. TANKS Monitor water levels of up to 4 water tanks. Tank properties, such as name and water source (i.e. clean or dirty water) are configurable via the Settings Menu. When a ‘Clean’ tank is almost empty, the tank will turn red to indicate the tank is almost out of water. A ‘Dirty’ tank will turn red when the tank is full and needs emptying. 4.
8. BATTERY STATUS Displays the battery’s power capacity and usage. BATTERY STATUS CHARGING The BatteryPlus35 is charging the battery-denoted by the lightening symbol DISCHARGING Indicates the caravan's battery is in use and the time remaining before the battery is completely discharged IDLE Indicates that no current is flowing into or out of the caravan battery Table 2: Battery status indicators 9. SMARTCONNECT Used to access the SmartConnect sensor screen. 10.
23°C 11 15 12 14 13 Figure 2: OdysseyControl Battery and Power Consumption 11. BATTERY AMPS Indicates the charging/discharging current of the battery connected to the BatteryPlus35. 12. BATTERY VOLTS Indicates the voltage of the battery connected to the BatteryPlus35. 13. INPUT SOURCE Indicates the power sources used for charging your battery and powering the caravan loads. 14. LOADS Indicates the current supplied by the BatteryPlus35 to power all loads connected to the BatteryPlus35. 15.
ODYSSEYLINK 1 2 Figure 3: The OdysseyLink 3 1. PAIRING BUTTON Used to enable Bluetooth pairing between the OdysseyLink and the OdysseyControl. 2. LED STATUS INDICATOR Indicates the operational/pairing status of the OdysseyLink. The LED will blink green if the OdysseyLink is ready to pair to the OdysseyControl. 3. SERIAL NUMBER Required when pairing the OdysseyLink to the OdysseyControl.
USING THE ODYSSEY PAIRING THE ODYSSEYLINK To pair the OdysseyLink to the OdysseyControl: 1. Make sure that the OdysseyLink is connected to the BatteryPlus35 and the BatteryPlus35 is powered on. 2. Press the Pairing Button on the OdysseyLink.The LED Status Indicator on the OdysseyLink will flash green, indicating you have 30 seconds to pair the OdysseyLink to the OdysseyControl. 3. Launch the Odyssey App and press scan at the prompt.
REGISTERING YOUR ODYSSEY If you have not registered your Odyssey, when you launch the Odyssey App you will be greeted with the registration screen. Figure 5: Registration screen To register your Odyssey: 1. Scroll down and press Register.
2. 3. 4. 5. Enter your name and email address. Select your RV brand. Choose whether your RV is new or used. Press Save. Figure 7: Entering registration details Your Odyssey is now registered with BMPRO.
CONFIGURING A NEW BATTERY Whenever you replace your caravan battery, make sure that it is configured with the OdysseyControl. Correctly configuring the battery capacity will ensure that the BatteryPlus35 will select the best charging parameters for the caravan battery in use and the software accurately estimates battery usage, including battery capacity and time remaining. To configure a new battery: 1. 2. 3. 4. 5. 6. Power down the BatteryPlus35. Replace the battery.
CONTROLLING LOADS WITH THE ODYSSEYCONTROL Controlling loads is as simple as pushing a button. A light grey icon indicates the load is on, and a dark grey icon indicates the load is off. The following examples describe situations in which a load is unable to be used. Low Battery Voltage If the caravan’s battery voltage drops to low levels, the BatteryPlus35 will automatically enter ECO Mode, stopping power to all caravan loads connected to the BatteryPlus35 load terminal block (except terminal 1).
VIEW CUSTOMISATION You can customise the appearance of the Odyssey App based on your RV accessories by going into Customise View in the Settings menu. By customising the view, you can disable features not available in your RV, such as slides or water tanks.
UPDATING THE ODYSSEY APP ON THE ODYSSEYCONTROL The OdysseyControl is set up to automatically receive Odyssey App updates when they become available, as long as the OdysseyControl is connected to the internet and logged in to a Google account. UPDATING THE ODYSSEYLINK FIRMWARE When the OdysseyControl is connected to the OdysseyLink and detects the firmware version on the OdysseyLink is out of date, the Odyssey App will automatically begin performing a firmware update.
WALL SWITCHES Wall Switches communicate via Bluetooth to the Node, giving you additional control of RV features. NOTE: Any Wall Switch you install in your RV has been paired to the OdysseyLink at the factory and is ready for immediate use. If a Wall Switch isn’t responding, it may need to be re-paired. PAIRING A WALL SWITCH TO THE ODYSSEYLINK Up to two Wall Switches can be paired to the OdysseyLink. To pair a Wall Switch to the OdysseyLink: 1. From the App home screen, press the Settings button. 2.
Figure 13: Paired Wall Switches UNPAIRING A WALL SWITCH FROM THE ODYSSEYLINK To unpair a Wall Switch from the OdysseyLink: 1. 2. 3. 4. From the App home screen, press the Settings button. Press Wall Switches. Next to Remove wall switches, press Unpair. Red Unpair buttons will appear next to the Wall Switch listings. Next to the Wall Switch you want to unpair, press Unpair. 5. Press Done.
CHECKING THE BATTERY IN YOUR WALL SWITCH Wall Switches are powered by a standard CR2032 3V Lithium Cell coin battery. To check if the battery needs replacing: 1. From the App home screen, press the Settings button. 2. Press Battery Levels. 3. Press any button on the Wall Switch you are checking. Once the button has been pressed, the App will refresh with the Wall Switch battery status. REPLACING THE BATTERY IN YOUR WALL SWITCH To replace the battery in a Wall Switch: 1. Unclip the Wall Switch button pad.
FAQS AND TROUBLESHOOTING Need more help troubleshooting your OdysseyControl or OdysseyLink? Contact our customer service team on line at teambmpro.com/technical-support ODYSSEYCONTROL Does the OdysseyControl connect to Wi-Fi? Yes, the OdysseyControl can connect to your local Wi-Fi network: 1. At the bottom of the screen, press the main screen icon to return to the OdysseyControl main screen. 2. From the main screen, press the Settings icon. 3.
The screen on my OdysseyControl is frozen. What do I do? If the screen on your OdysseyControl is frozen, reset your OdysseyControl by inserting a small thin object, such as a paper clip, into the reset pin hole located on the top of the OdysseyControl.
LOAD CONTROL I think one of my loads is not receiving power? The load may be faulty. The electronic load fuse that protects the load may have been activated, which will turn the faulty load off. If this is the case, the LED Status Indicator on the BatteryPlus35 will flash a solid red. Please disconnect the faulty load from the BatteryPlus35.
2. Low Voltage Mode is Switched On This pop-up message will display if the BatteryPlus35 has entered ECO Mode, which is the first stage of a low voltage disconnection. All icons in the OdysseyControl will be dark grey. The Pairing Status Icon will indicate that the OdysseyControl is paired to the OdysseyLink. Connect the BatteryPlus35 to a power source and begin battery charging.
3. There is No Bluetooth Connection All icons in the Odyssey App will be dark grey. The Pairing Status Icon will indicate that the OdysseyControl is not paired to the OdysseyLink. This message will display if: 1. The switch connected to the BatteryPlus35 Remote Switch input is activated. If this is the case, deactivate the switch. 2. The BatteryPlus35 has entered Storage Mode, which is the second stage of a low voltage disconnection.
PAIRING I’ve paired the OdysseyControl to the OdysseyLink, but the Pairing Status icon shows that they are not connected? Check the following: 1. Ensure the Bluetooth on the OdysseyControl is turned on. 2. Ensure the switch on the BatteryPlus35 Remote Switch input is not activated. 3. Ensure the BatteryPlus35 is not in Storage Mode, as this will turn power to the OdysseyLink off, meaning the OdysseyLink cannot talk to the OdysseyControl.
APPENDICES SPECIFICATIONS OdysseyControl Input Voltage 5V DC Input Current 3A Charger Input Voltage 12V Communication/Charger Cable USB-to-microUSB Weight 0.5 kg OdysseyLink Input Voltage 8-15V DC Battery Drain < 21mA Ambient Temperature 0-50C Cable Length 0.5m Wall Switch Input Voltage 2.2-3.
COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WARRANTY TERMS AND CONDITIONS Registering your BMPRO product is an important step to ensure that you receive all the benefits you are entitled to. Please visit teambmpro.com to complete the online registration form for your new product today. 1. BMPRO goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage.
POWERING YOUR ADVENTURES. TEAM BMPRO .COM BMPRO customerservice@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia teambmpro.
