Datasheet

SES strain relief bushes DM

in Polyamide 6

(for technical properties see page D100) -20 to +70°C

I/03

A22/20 - 01A22/20 - 01

principle of cable

clamping

Round bore (ØA)

For torsional protection of

strain relief grommets, an

oblong bore (B) is required.

Application tools : see following page

wire diameter in mm dimensions in mm

type article numnber article numnber pack PVC rubber bore

black white insulation insulation Ø A B a b Ø

round cables

DM 2 0131 0012 010 0131 0012 001 100 Ø 3 to 4,5 Ø 3 to 4,5 9,5 8,5 1,7 10,3 11

DM 2L 0131 0032 010 0131 0032 001 100 Ø 3 to 4,5 Ø 3 to 4,5 9,5 8,5 3,1 10,3 11

DM 4 0131 0001 010 0131 0001 001 100 Ø 5 to 6,5 Ø 5 to 7 13,0 11,5 2,5 12,0 14

DM 5 0131 0010 010 0131 0010 001 100 Ø 6,5 to 7,5 Ø 6,5 to 7,5 13,0 11,5 2,5 11,0 14

DM 6 0131 0002 010 0131 0002 001 100 Ø 6,6 to 8 Ø 7,1 to 9 16,0 14,0 3,0 17,0 18

DM 7 0131 0003 010 0131 0003 001 100 Ø 8,1 to 10 Ø 9,1 to 11 22,5 21,0 3,0 20,0 25

DM 8 0131 0004 010 0131 0004 001 100 Ø 10,1 to 12,5 Ø 11,1 to 16 22,5 21,0 3,5 22,0 25

flat cables

DM 2P 0131 0022 010 0131 0022 001 100 3 x 5 3 x 5 9,5 8,5 1,7 10,3 11

DM 2LP 0131 0042 010 0131 0042 001 100 3 x 5 3 x 5 9,5 8,5 3,1 10,3 11

DM 4P 0131 0020 010 0131 0020 001 100 3 x 7,6 3,8 x 7,1 13,0 11,5 2,8 10,5 14

DM 6P 0131 0021 010 0131 0021 001 100 5 x 9 5 x 9 16,0 14,0 3,0 17,0 18

PAGE 1
SES strain relief bushes DM in Polyamide 6 DM-SES -20 to +70°C (for technical properties see page D100) Round bore (ØA) For torsional protection of strain relief grommets, an oblong bore (B) is required.
PAGE 2
SES application tool DM DM-SES for strain relief grommets DM type article number for small or mid-sized series pack description characteristics length weight 1 rack and pinion pliers with adjustable jaws to apply all types of strain relief grommets DM-SES DM manual tool R 29 A22/20 - 02 0655 0001 000 VI/01 180 mm 270 g A22/20 - 02
PAGE 3
°C MPa Résist. à basse temp. Kältebeständigkeit Low temper. resistance Lage temp.-bestendigheid Res. a bajas temp. °C Allongement à la rupture Reissdehnung / Ultimate elongation Max. rek voor breuk Estramiento rotura °C Résistance à la rupture / Zugfestigkeit Tensile strength at break / Scheurvastheid Resist. a la rotura % Temp. de rétreint / Schrumpftemperatur / Shrink temp. Krimptemperatuur / Temp.
PAGE 4
A1/1 A2/1 4 x 109 > 13 SILAVIA Qual. 2412 A1/3 A2/2 10 PLIO-SUPER Qual. 9923 A3/1 A3/2 to 20°C : 3x10 PLIO-HT Qual. 9861 A3/5-6 PLIO-BT Qual. 9863 A3/5-6 PLIO Tube Qual. 9832 A3/7 Corrosivité / Korrosion Corrosion / Corrosiegedrag Corrosividad Indice d’oxygène / Sauerstoffindex Limiting oxygen index (LOI) Zuurstofindex / Índice de oxígeno kV/mm Qual.