Quick Start Guide
Table Of Contents
- 1 Electronic Shelf Labeling – A brief introduction
- 2 Label Family Introduction
- 3 Get the latest software and documentation
- 4 Core Appliance
- 5 Core Appliance initial setup
- 6 Start SES-imagotag Core Service and SES-imagotag Control Center
- 7 ESL Access Point Configuration
- 8 Selecting channels
- 9 Setup Security
- 10 Register labels
- 11 Start tagging
- 12 Templates
- 13 Integration
- 14 Troubleshooting
- 14.1 SES-imagotag Core Service Dashboard
- 14.2 Running the SES-imagotag Core Service as a background service
- 14.3 Where can get a demo/development license key?
- 14.4 Deleting the demo articles
- 14.5 Establish a network configuration when no DHCP is available – Step by step
- 14.6 Access point discovering with Bonjour Services
- 14.7 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 14.8 Labels don’t come online
- 14.9 The encryption does not work
- 14.10 Unlocking labels
- 14.11 Starting Java applications
- 14.12 Encoding problems
- 14.13 Reserve RAM for Java heap space
- 14.14 Further documentation
Core Service Quick Start Guide
Page 2 of 45
1 Electronic Shelf Labeling – A brief introduction
5
2 Label Family Introduction 6
2.1 General Key Features 6
2.2 The G1 label family 7
2.3 The VUSION label family 7
3 Get the latest software and documentation 8
3.1 Install software 8
3.2 System requirements 8
3.3 Installation process 8
3.4 SES-imagotag Customer and Partner Portal 9
4 Core Appliance 10
4.1 Why is it needed in the Store? 10
4.2 Key Features 10
5 Core Appliance initial setup 11
5.1 USB device configuration 11
5.2 Front side LEDdescription 12
5.3 Additional documentation 12
6 Start SES-imagotag Core Service and SES-imagotag Control Center 13
6.1 Starting SES-imagotag Core Service 13
6.1.1 Example articles 13
6.2 Starting SES-imagotag Control Center 14
6.2.1 SES-imagotag Control Center Login 15
6.3 Activating your license 15
7 ESL Access Point Configuration 17
7.1 Connect and configure AP-2010 17
7.1.1 Connect and configure 17
7.1.2 Discover the Access Point 17
7.1.3 Necessary configuration over the AP-2010 web UI 18
7.1.4 Necessary configuration at the SES-imagotag Control Center 19
7.1.5 The Status LED 19
7.2 Connect and configure LANCOM access point 20
7.2.1 First configuration steps 20
7.2.2 Access Point IP address 20
7.2.3 Configuration: Wireless ePaper 21
7.2.4 LCOS Menu Tree 21
7.2.5 Setup – Wireless ePaper 21
7.2.6 Status – Wireless ePaper 22
7.2.7 Necessary configuration at the SES-imagotag Control Center 22
7.2.8 Automatic channel selection
23
8 Selecting channels 25
9 Setup Security 26