Quick Start Guide
Table Of Contents
- 1 Electronic Shelf Labeling – A brief introduction
- 2 Label Family Introduction
- 3 Get the latest software and documentation
- 4 Core Appliance
- 5 Core Appliance initial setup
- 6 Start SES-imagotag Core Service and SES-imagotag Control Center
- 7 ESL Access Point Configuration
- 8 Selecting channels
- 9 Setup Security
- 10 Register labels
- 11 Start tagging
- 12 Templates
- 13 Integration
- 14 Troubleshooting
- 14.1 SES-imagotag Core Service Dashboard
- 14.2 Running the SES-imagotag Core Service as a background service
- 14.3 Where can get a demo/development license key?
- 14.4 Deleting the demo articles
- 14.5 Establish a network configuration when no DHCP is available – Step by step
- 14.6 Access point discovering with Bonjour Services
- 14.7 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 14.8 Labels don’t come online
- 14.9 The encryption does not work
- 14.10 Unlocking labels
- 14.11 Starting Java applications
- 14.12 Encoding problems
- 14.13 Reserve RAM for Java heap space
- 14.14 Further documentation
Core Service Quick Start Guide
Page 18 of 45
FIGURE 1-12: List of discovered ESL access points
Now you’re able to configure the ESL access point via AP-2010 web UI under http://<DHCP-IP-
address> or a right click on the discovered AP –> Open in browser....
In the status overview you get some details about the AP-2010:
FIGURE 1-13: AP-2010 Status overview
It’s recommended for the demo installation not to use the “Centralized Configuration” feature and
configure the AP manually.
7.1.3 Necessary configuration over the AP-2010 web UI
The following actions need to be performed over the AP-2010 web UI
1. Deactivate Centralized Configuration: Administration -> Configuration Mode
2. Set up network details (or leave DHCP): Administration -> Network
3. Set up an ESLchannel: Administration -> Wireless Channel