System Instructions

Page 5
Optimal storage temperature
0° C to +30° C
0° C to +30° C
0° C to +30° C
Optimal storage humidity
(non-condensing)
40% - 60%
40% - 60%
40% - 60%
Do not operate any ESL Infrastructure (e.g. SES-imagotag AP-2010 or MAP
2014T/Lancom L-151E, ... ) in warehouse storing labels or where the radio coverage
will activate stored labels.
o The label will permanently try to connect to the access point, leading to less
usable battery lifetime.
The maximum storage time of labels should not exceed 0.5-1 year
If these listed limits are not complied, the specified battery lifetime can vary, and display
quality can be influenced negatively.
LCD Display (LCG3-0230-A)
VUSION 2.3 DYN has LCD display.
Operating temperature: 0 °C to 50 °C
Intended Use
The VUSION electronic shelf label family is exclusively designed to connect to Access Points
of the company SES-imagotag or acknowledged partners via radio.
The device may only be used in areas where the environmental fulfill the requirements
described in the chapter Environmental.
Improper use
The SES-imagotag is not responsible and does not assume liability for damage or injury to
persons, property, environment and the VUSION electronic shelf label family itself caused by
improper installation or improper handling.
The operator assumes liability for any damage that results from improper use.
The following usage is not allowed:
Don't drop VUSION Family Labels.
Keep VUSION Family Labels away from water.
Don’t use the VUSION Labels with defective parts.
Don’t use the VUSION Labels with spare parts and accessories which are not
examined and approved by SES-imagotag.
Unauthorized changes or modifications to the VUSION Labels and their
components without the consent of SES-imagotag are strictly forbidden.
The SES-imagotag VUSION Labels do not contain parts, except batteries, that
are allowed to be maintained by the user.
The SES-imagotag VUSION Labels must NOT be dismantled. For necessary
maintenance or repair works always contact the manufacturer.
Don't throw VUSION Labels into the dustbin. Deposit VUSION Labels at a
reprocessing company.
Contact SES-imagotag for more details about the removal process.