User's Manual

Only persons with the following knowledge are allowed to replace the battery:
 Battery
 Electronic assemblies like circuit board
 Compliance of the instructions
 Risk of explosion through incorrect battery replacement.
 Use battery pack exclusive provided from the company imagotag GmbH.
 Keep attention that your hands are dry before you start with the replacement.
 Don’t use sharps to open the label.
 Don’t use your fingernails to open the label.
 Don’t touch the circuit board of the open label.
1. Use the imagotag battery cover tool to open the battery cover. Afterwards take the battery cover
from the label.
2. Pull the white plug out of the socket, don’t pull on the cable.
3. Take out the battery pack.
4. Put in the new battery pack.
5. Push the white plug in the socket.
6. Put the battery cover on the label casing.