User guide

SERVSWITCH™ BRAND CATX KVM EXTENDER FAMILY
30
LF too low LF too high
HF too low HF too high
Figure 7 Problems with smearing and sharpness requiring LF and
HF adjustment
6. Identify the ‘slowest’ color – the colored line furthest to the right. Delay the signals of
the two other colors using the following commands:
Delay Command Key Sequence
Increase RED Delay (move right)
Decrease RED Delay (move left)
<R> + <Right Arrow>
<R> + <Left Arrow>
Increase GREEN Delay (move right)
Decrease GREEN Delay (move left)
<G> + <Right Arrow>
<G> + <Left Arrow>
Increase BLUE Delay (move right)
Decrease BLUE Delay (move left)
<B> + <Right Arrow>
<B> + <Left Arrow>
Use the Quick Skew feature to determine which color requires delaying or to quickly set
the delay on a color back to zero. Applying Quick Skew to a color toggles its delay
between zero and 19nS (a typically required value).
Quick Skew Command Key Sequence
Toggle RED Delay
<Left Control> + <R>
Toggle GREEN Delay
<Left Control> + <G>
Toggle BLUE Delay
<Left Control> + <B>