Specifications

APPENDIX C: Keyboard-Command Summary

Appendix C:

Keyboard-Command Summary

Here is a brief list of the keyboard commands you can use to control your

ServSwitch

™

Brand CAT5 KVM Extender. For detailed descriptions of the

commands and the effects they have on the system (including their effects on the

keyboard LEDs), refer to Section 7.3.

Single-Access Extender (ACU1001A)

Function: Keyboard command/activity:

Take control of CPU Press any key on keyboard or move mouse

Reset keyboard and mouse Press and release [Scroll Lock] once

Send null byte to mouse Press and hold left and right mouse buttons, then

press and release [Scroll Lock] once

Dual-Access Extender (ACU1009A)

Function: Keyboard command/activity:

Take control of CPU Press any key on keyboard or (if Extender is set

for this—see Section 5.2.2) move mouse

Reset keyboard and mouse Press and release [Scroll Lock] once at Remote

Unit, twice at Local Unit

Send null byte to mouse Press and hold left and right mouse buttons, then

press and release [Scroll Lock] once

Enter Private Mode At Local Unit only: Press and release

[Scroll Lock] once

Switching Extender (ACU1049A)

Function: Keyboard command/activity:

Take control of local CPU Press any key on keyboard or move mouse

Reset keyboard and mouse Press and release {hotkey*}, then press and

release keypad’s up-arrow (number [8]) key

Send null byte to mouse Press and release {hotkey*}, then press and

release keypad’s left-arrow (number [4]) key

Enter Private Mode Press and release {hotkey*}, then press and

release [Scroll Lock]

Switch to other CPU

At Remote Unit only: Press and release {hotkey*},

then press and release keypad’s plus ([+]) key

*The default {hotkey} is right-[Ctrl], but you can set it to left-[Ctrl]; see Section 5.2.3.