Specifications

34
SERVSWITCH
™
BRAND CAT5 KVM EXTENDER
6.2.4 A TTACHING A S ERV S WITCH F AMILY KVM S WITCH TO AN E XTENDER U NIT ’ S U SER P ORT
The way you’ll do this will depend on whether the switch’s CPU ports are multiple
connectors (see Section 6.2.4.A) or single connectors (see Section 6.2.4.B). (Refer
to the listings in Section 4.2.4 for which switch models are in which category.)
6.2.4.A Attaching a Switch with Multiple CPU-Port Connectors
Attach one end of the included extension cabling (or equivalent cabling—see
Section 4.2.4.A) to the CPU-port monitor, keyboard, and mouse connectors on the
KVM switch. Attach the other end of the cabling to the Extender Unit’s matching
user-port connectors.
Figure 6-10. Attaching a KVM switch with multiple CPU-port connectors to
the user port on an Extender Unit (Dual-Access Local Unit shown).
ServSwitch Wizard Pro (SW644A)
KVM-extension
cabling, included
with all models,
or use Premium
KVM CPU Cable
(EHN408)