Specifications

11
CHAPTER 2: Specifications
2. Specifications
Cable Required: Between Local and Remote Units: Category 5 solid
unshielded or shielded twisted pair (UTP or STP),
wired to the EIA/TIA-568A or (preferred) -568B
standard, terminated with RJ-45 male connectors; for
pinning/pairing, see Appendix A
Compliance: CE Class B, FCC Part 15 Subpart J Class A, IC Class/
classe A
Compatibility: Video: VGA, SVGA, XGA, XGA-2, or RGB (sync on
green), although if your system has monitor ID-bit
requirements, you might need to call Black Box for
technical support;
Keyboard: IBM PC/AT or PS/2 compatible
(PC/AT types require connector adapter);
Mouse: IBM PS/2 compatible two-button, Microsoft
IntelliMouse, or Logitech PS/2 compatible 3-button
Interfaces: Video: VGA;
Keyboard and mouse: IBM PS/2 compatible;
Between units and (on ACU1049A) to remote CPU:
Proprietary composite
Video Bandwidth
(to –3 dB): Local Unit: 150 MHz;
Remote Unit: 300 MHz;
Across 100 meters (328 feet) of UTP: 95 MHz (with
equalization)
Resolution: Up to 1600 x 1280 noninterlaced at up to 60 m (200 ft.);
Up to 1280 x 1024 noninterlaced at up to 120 m (400 ft.);
Up to 1024 x 768 noninterlaced at up to 300 m (1000 ft.)
Video I/O
Signal Levels: 0.7 volts peak-to-peak
Video
Compensation: 3-stage continuously variable
Synchronization: H/V or composite, TTL signal levels; sync polarity
is preserved