Servosila-SC-25-Datasheet

Power Supply
The controllers require 7.0 – 60.0 V DC power input. The controllers come with built-in high-capacity filters for the
power input. There are terminals as well as soldering holes (soldering contacts) for connecting power supply lines in
a vibration-resistant way.
The power supply terminals are polarity sensitive.
Power Output
The SC-25 controllers can provide power to external modules such as encoders using +5.0V and GND output pins as
well as via dedicated soldering holes (soldering contacts).
The nominal output current is 0.150 A at 5.0V.
The output power lines are protected by fuses set at 0.300 A. The fuses are reset by power-cycling the controller.
Mounting
Suggested bolts are DIN912 M2.5 or DIN84 M2.5.
17 www.servosila.com