Servosila-SC-25-Connecting-RLS-AksIM-2-BISS-C-Encoders-Technical-Note

Table Of Contents

Introduction

This technical note is written in regards to RLS AksIM-2 magnetic absolute encoder with a

BISS-C interface.

RELEVANT PART NUMBERS:

MB064DCC20BDNT00 (encoder read head, a 20bit encoder)

MRA064BC040DSE00 (magnetic ring)

The encoder’s output rate has been found fast enough to be used for servo, direct drive and

field-oriented control (FOC commutation) purposes.

BISS-C interface

When making a cable, refer to the datasheets of both devices to match SSI pins of the

corresponding connectors.

3 www.servosila.com