Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
SERVISOL FORMENSCHUTZ
FARBLOS
Creationdate :
21.01.15 Version : 1.0
Ref.Nr.:
UDS000261_3_20150121 (EN)
Replaces:
UK20011
5 / 10
CRC Industries UK Limited
Ambersil House, Wylds Road, Castlefield Industrial Estate,
Bridgwater, Somerset, TA6 4DD
Tel: [phone] Fax: [phone] web: www.crcind.com
Shut off all ignition sources
Ensure adequate ventilation
Wear suitable protective clothing and gloves.
6.2. Environmental precautions
Do not allow to enter public sewers and watercourses
If polluted water reaches drainage systems or water courses, immediately inform appropriate authorities
6.3. Methods and material for containment and cleaning up
Absorb spillage in suitable inert material
Place in appropriate container
This material and/or its container must be disposed of as hazardous waste.
6.4. Reference to other sections
For further information see section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Equipment should be earthed
Use explosion-proof electrical/ventilating/lighting/.../equipment.
Use only non-sparking tools.
Do not breathe aerosols or vapours.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Wash thoroughly after use
Wear protective gloves/protective clothing/eye protection/face protection.
Eyewash bottles should be available
7.2. Conditions for safe storage, including any incompatibilities
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep out of reach of children.
7.3. Specific end use(s)
Anti Corrosion Products
SECTION 8: Exposure controls/personal protection
8.1. Control parameters